Aerosense simulations for wind field reconstruction

This dataset contains wind field and wind turbine dynamics simulations for different mean wind speed and turbulence intensity conditions. The dataset contains 108 simulations and each simulation consists of two data files, one named "AerosenseOutput.out", which contains the measured signals from the wind turbine and a second one named "TurbulentField.bts", containing the wind speed in all three directions at a number of grid points within the rotor plane. The different simulation cases are structured as follows: Runs 001 to 036: Wind speed 6 m/s Runs 001 to 012: Turbulence intensity 2% Runs 013 to 024: Turbulence intensity 10% Runs 025 to 036: Turbulence intensity 25% Runs 037 to 072: Wind speed 12 m/s Runs 037 to 048: Turbulence intensity 2% Runs 049 to 060: Turbulence intensity 10% Runs 061 to 072: Turbulence intensity 25% Runs 073 to 108: Wind speed 20 m/s Runs 073 to 084: Turbulence intensity 2% Runs 085 to 096: Turbulence intensity 10% Runs 097 to 108: Turbulence intensity 25%本数据集涵盖针对不同平均风速与湍流强度工况的风场及风力机动力学仿真结果。数据集共包含108组仿真，每组仿真对应两份数据文件：其一名为"AerosenseOutput.out"，内含风力机实测信号；其二名为"TurbulentField.bts"，收录转子平面内多个网格点处三个方向的风速分量。 各组仿真工况划分如下： 1. 编号001至036的仿真：平均风速为6 m/s - 001至012号仿真：湍流强度为2% - 013至024号仿真：湍流强度为10% - 025至036号仿真：湍流强度为25% 2. 编号037至072的仿真：平均风速为12 m/s - 037至048号仿真：湍流强度为2% - 049至060号仿真：湍流强度为10% - 061至072号仿真：湍流强度为25% 3. 编号073至108的仿真：平均风速为20 m/s - 073至084号仿真：湍流强度为2% - 085至096号仿真：湍流强度为10% - 097至108号仿真：湍流强度为25%