Summary data and figures for MWCNT/epoxy nanocomposite mechanical study (0–0.5 wt %, manual vs. ultrasonic dispersion), 50–150 Hz

Summary (reduced) data and figures underlying the article 'Frequency-dependent dynamic mechanical response of multi-walled carbon nanotube/epoxy nanocomposites for mechanical vibration damping above 150 Hz' by Nazarov and Oreshenko: static uniaxial compression and 50–150 Hz dynamic mechanical analysis of R200 epoxy with 0, 0.1, 0.3 and 0.5 wt % MWCNT, processed by manual mixing and by 30 min flow-mode ultrasonic cavitation. The record contains the summary tables (article Tables I and II) and the article figures. See README.txt for column definitions and units. Per-point raw instrument traces are not part of this record.纳扎罗夫（Nazarov）与奥列申科（Oreshenko）所著论文《150 Hz以上机械减振用多壁碳纳米管（multi-walled carbon nanotube, MWCNT）/环氧基纳米复合材料的频率相关动态力学响应》的精简汇总数据与配套图表。本数据集涵盖R200环氧树脂分别掺杂0、0.1、0.3、0.5 wt%多壁碳纳米管的试样的静态单轴压缩试验数据，以及50~150 Hz频段的动态力学分析数据；所有试样分别通过手工混合法与30分钟流道模式超声空化工艺制备。本数据集包含论文中的汇总表格（原文表I与表II）及配套图表。各列的定义与单位详见README.txt文件。单测点的原始仪器测试曲线不属于本数据集收录范围。