Supplementary material (part 2) for "On the effect of tributary valleys on thermally driven winds in the main valley: a case study in the Inn Valley"

Part 2 of the supplementary material for the master's thesis "On the effect of tributary valleys on thermally driven winds in the main valley: a case study in the Inn Valley." (Deidda 2023, available at https://resolver.obvsg.at/urn:nbn:at:at-ubi:1-134436). The supplementary material consists in two parts: part 1 includes scripts, datasets, model setup files and figures (available at https://zenodo.org/records/8089010), while part 2 includes the model output needed to create the figures (see description below). This directory contains part of the model output used for the thesis. The model used is WRF-ARW version 4.4 (Skamarock et al. 2021). Information on the model setup is available in the thesis, Section 2.2. For storage limitations, only the files needed to create the graphs presented in the thesis are available. The file format is type_domain_date.nc where domain is "d01" or "d02" (respectively for the outer or inner domain, see Section 2.2 in the thesis), while type is "wrfout", "mean_out", or "Averaged", where: "wrfout" is the instantaneous WRF output; "mean_out" is the time-averaged WRF output, computed using the fork WRFlux. "Averaged" is a combination of time-averaged and instantaneous outputs. These files were created using the the script Create_intermediate_files.py, available in the software directory (in Scripts.zip). These files were computed to have a lighter and WRF-like formatted data containing the averaged fields needed for the analysis.本内容为硕士论文《主河谷中支谷对热力驱动风的影响研究——以因河河谷为例》（Deidda 2023，可通过https://resolver.obvsg.at/urn:nbn:at:at-ubi:1-134436获取）的补充材料第二部分。该补充材料分为两部分：第一部分包含脚本、数据集、模型配置文件与图表（可通过https://zenodo.org/records/8089010获取），第二部分包含绘制图表所需的模型输出（详见下文说明）。 本目录包含本论文所使用的部分模型输出数据。所用模型为WRF-ARW 4.4版本（Skamarock等，2021）。模型配置相关信息可见论文第2.2节。受存储容量限制，仅提供绘制论文中图表所需的文件。 文件命名格式为`type_domain_date.nc`，其中`domain`取值为"d01"或"d02"（分别对应外域与内域，详见论文第2.2节）；`type`取值为"wrfout"、"mean_out"或"Averaged"，各类型说明如下： - "wrfout"：WRF瞬时输出文件； - "mean_out"：经WRFlux分支版本计算得到的时间平均WRF输出文件； - "Averaged"：时间平均与瞬时输出的组合文件。 上述文件通过软件目录（位于Scripts.zip中）内的`Create_intermediate_files.py`脚本生成，旨在生成轻量化且符合WRF格式的数据集，包含分析所需的平均场数据。