Table 1 in Resurrection of Pareiorhaphis Miranda Ribeiro, 1918 (Teleostei: Siluriformes: Loricariidae), and description of a new species from the rio Iguaçu basin, Brazil

Table 1. Descriptive morphometrics and meristics of Pareiorhaphis parmula. Values are given as ranges for all measured specimens. Standard length is expressed in mm. Character HolotypeNRangeMeanSDStandard length (mm) 93.32943.5-94.568.410.421Percents of Standard lengthHead length 29.52929.4-33.631.51.081Predorsal length 40.72941.5-45.043.10.835Postdorsal length 42.72939.5-44.541.51.251Dorsal-fin spine length 21.82619.6-23.021.10.879Anal-fin spine length 17.12814.3-17.215.30.643Pectoral-fin spine length 18.82917.2-19.618.40.608Pelvic-fin spine length 22.12918.6-22.921.20.956Uppermost caudal-fin ray 23.62721.8-25.823.60.986Lowermost caudal-fin ray 24.32922.8-26.724.71.036Adipose-fin spine length 7.8265.9-8.46.90.683Thoracic length 16.22815.8-19.417.50.794Abdominal length 24.52923.2-27.825.31.164Cleithral width 28.82927.9-31.029.60.717Body width at anal-fin origin 13.62913.6-15.714.50.620Length of caudal peduncle 38.72934.4-37.935.80.844Depth of caudal peduncle 8.6298.2-9.28.80.272Width of caudal peduncle 5.7294.1-6.75.50.604Percents of head lengthSnout length 58.92953.8-63.059.01.925Orbital diameter 13.82912.7-15.914.10.795Least interorbital width 33.12929.5-35.231.91.118Head depth 57.12949.5-63.856.23.465Mandibular ramus 20.72916.6-21.019.10.942CountsLateral plates in median series 30/302928-3129.60.671Teeth on premaxilla 47/472931-4839.23.804Teeth on dentary 45/452932-4840.23.749Plates lateral to dorsal fin 7296-76.60.494Plates between dorsal/adipose 7297-97.50.574Plates between adipose/caudal 4294-65.10.516Plates lateral to anal fin 3293-43.80.435Plates between anal/caudal 132911-1312.50.574表1 盾皮锉甲鲶（Pareiorhaphis parmula）的形态测量学与计数性状统计。所有被测标本的各性状值均以区间范围形式呈现，标准体长（Standard length）单位为毫米（mm）。 其中头长、背前长等形态测量性状均以占标准体长的百分比形式给出，具体统计如下： 1. 标准体长（mm）：正模值93.3，样本量29，区间范围43.5-94.5，均值68.4，标准差10.421 2. 头长：正模值29.5%，样本量29，区间范围29.4%-33.6%，均值31.5%，标准差1.081% 3. 背前长：正模值40.7%，样本量29，区间范围41.5%-45.0%，均值43.1%，标准差0.835% 4. 背后长：正模值42.7%，样本量29，区间范围39.5%-44.5%，均值41.5%，标准差1.251% 5. 背鳍棘长：正模值21.8%，样本量26，区间范围19.6%-23.0%，均值21.1%，标准差0.879% 6. 臀鳍棘长：正模值17.1%，样本量28，区间范围14.3%-17.2%，均值15.3%，标准差0.643% 7. 胸鳍棘长：正模值18.8%，样本量29，区间范围17.2%-19.6%，均值18.4%，标准差0.608% 8. 腹鳍棘长：正模值22.1%，样本量29，区间范围18.6%-22.9%，均值21.2%，标准差0.956% 9. 最上尾鳍鳍条长：正模值23.6%，样本量27，区间范围21.8%-25.8%，均值23.6%，标准差0.986% 10. 最下尾鳍鳍条长：正模值24.3%，样本量29，区间范围22.8%-26.7%，均值24.7%，标准差1.036% 11. 脂鳍棘长：正模值7.8%，样本量26，区间范围5.9%-8.4%，均值6.9%，标准差0.683% 12. 胸区长：正模值16.2%，样本量28，区间范围15.8%-19.4%，均值17.5%，标准差0.794% 13. 腹区长：正模值24.5%，样本量29，区间范围23.2%-27.8%，均值25.3%，标准差1.164% 14. 匙骨宽：正模值28.8%，样本量29，区间范围27.9%-31.0%，均值29.6%，标准差0.717% 15. 臀鳍起点处体宽：正模值13.6%，样本量29，区间范围13.6%-15.7%，均值14.5%，标准差0.620% 16. 尾柄长：正模值38.7%，样本量29，区间范围34.4%-37.9%，均值35.8%，标准差0.844% 17. 尾柄高：正模值8.6%，样本量29，区间范围8.2%-9.2%，均值8.8%，标准差0.272% 18. 尾柄宽：正模值5.7%，样本量29，区间范围4.1%-6.7%，均值5.5%，标准差0.604% 吻长、眼径等性状以占头长的百分比形式给出，具体统计如下： 1. 吻长：正模值58.9%，样本量29，区间范围53.8%-63.0%，均值59.0%，标准差1.925% 2. 眼径：正模值13.8%，样本量29，区间范围12.7%-15.9%，均值14.1%，标准差0.795% 3. 最小眶间距：正模值33.1%，样本量29，区间范围29.5%-35.2%，均值31.9%，标准差1.118% 4. 头高：正模值57.1%，样本量29，区间范围49.5%-63.8%，均值56.2%，标准差3.465% 5. 下颌支长：正模值20.7%，样本量29，区间范围16.6%-21.0%，均值19.1%，标准差0.942% 计数性状统计如下： 1. 中轴系列侧板数：正模值30/30，样本量29，区间范围28-31，均值29.6，标准差0.671 2. 前颌骨齿数：正模值47/47，样本量29，区间范围31-48，均值39.2，标准差3.804 3. 齿骨齿数：正模值45/45，样本量29，区间范围32-48，均值40.2，标准差3.749 4. 背鳍外侧骨板数：正模值7，样本量29，区间范围6-7，均值6.6，标准差0.494 5. 背鳍与脂鳍间骨板数：正模值7，样本量29，区间范围7-9，均值7.5，标准差0.574 6. 脂鳍与尾鳍间骨板数：正模值4，样本量29，区间范围4-6，均值5.1，标准差0.516 7. 臀鳍外侧骨板数：正模值3，样本量29，区间范围3-4，均值3.8，标准差0.435 8. 臀鳍与尾鳍间骨板数：正模值13，样本量29，区间范围11-13，均值12.5，标准差0.574