相关数据集
尾门密封条钢带疲劳强度预测数据
作为工程材料在循环交变载荷作用下长期服役安全可靠性的关键指标，疲劳强度(一般指材料在经受10^7次交变载荷作用后不发生疲劳断裂时的最大应力）得到了抗疲劳设计开发者们的持续关注。目前疲劳强度的获得主要依靠疲劳测试，经济成本与时间成本因此而居高不下。申请人在Wohler公式等理论的基础上，以σw=σy*[C-(σy/σb)]/ω为基本函数形式，以静态拉伸性能预测动态疲劳性能为基本指导思想，通过对材料弹
浙江省数据知识产权登记平台2024-11-01 更新390
Low cycle fatigue - strain control test data for AISI 304L ar material at 300 °C and nominal strain range of .46 % (second nominally repeat test)
Data created by CIEMAT during the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment. This project has received funding from the Euratom
DataCite Commons2020-11-26 更新50
Cross section pictures of the square specimens under torsional cyclic loads with corner initial crack
The response of the materials under the action of cyclic loads is always a topic of interest of the engineers and researchers. In this dataset is showed the results for the torsional fatigue test of t
NIAID Data Ecosystem30
Fatigue data of Cement Bitumen Treated Material Mixture C3E5.5 (over 28 days of curing at 20C)
Fatigue data of Cement Bitumen Treated Material Mixture C3E5.5 (over 28 days of curing at 20C) Dataset presents data of fatigue life determined for cold recycled mixture – cement bitumen treated mater
DataCite Commons2024-01-24 更新70
Test data for high cycle fatigue on material IN 738 lc at 850 Celsius
Data created at Henry Wiggin (now Special Metals Wiggin) in the context of a COST 50 project to investigate the high cycle fatigue behaviour of nickel base alloys, during which high cycle fatigue, cre
DataCite Commons2020-10-05 更新40
