柔性传感器阵列压力响应时间

课题1依据中华人民共和国计量检定规程JJG 624-2005动态压力传感器检定规程技术文件规定，采用Φ100激波管动态压力标准装置通过瞬态激励法对柔性压力传感器进行动态性能试验，记录传感器电信号响应波形，响应时间为压力传感器被阶跃压力激励时，其响应值从阶跃响应幅度的0%过渡到63%所需的时间。传感器电信号响应波形由中国航空工业集团有限公司北京长城计量测试技术研究所测试采集并出具测试报告。Task 1 is conducted in accordance with the technical document of the Metrological Verification Regulation for Dynamic Pressure Sensors JJG 624-2005 of the People's Republic of China. Dynamic performance tests were performed on flexible pressure sensors using the Φ100 shock tube dynamic pressure standard device through the transient excitation method. The electrical signal response waveforms of the sensors were recorded during the tests. The response time is defined as the duration required for the response value of the pressure sensor to transition from 0% to 63% of its step response amplitude when excited by a step pressure. The electrical signal response waveforms were collected and the corresponding test report was issued by Beijing Great Wall Metrology and Testing Technology Institute, Aviation Industry Corporation of China, Ltd.

搜集汇总

背景与挑战

背景概述

该数据集记录了柔性传感器阵列在动态压力下的响应时间，采用瞬态激励法进行测试，数据由中国航空工业集团有限公司北京长城计量测试技术研究所采集并出具测试报告。数据集属于国家重点研发计划项目，适用于研究柔性传感器的动态性能。