gcode files halfshed_3DCP and Fullshed_PLA

Figshare2025-05-21 更新2026-04-28 收录

3D打印

增材制造模拟

数据链接：

https://figshare.com/articles/dataset/gcode_files_halfshed_3DCP_and_Fullshed_PLA/29120096 数据链接链接失效反馈

官方服务：

资源简介：

gcode files for paper "Integrated Simulation and Visualization Systems for Improving 3D Construction Printing Prototyping Processes"

创建时间：

2025-05-21

单液滴三维成型调控及立体印刷技术验证数据集

3D打印

液滴生成

通过调控固化界面的粘附性质并利用单液滴打印，使系统同时具有低的液体粘附，确保连续打印过程中单液滴三相接触线的退浸润行为，可精准实现单液滴完全转化为所设计的3D结构。这能够极大提升液滴利用率，降低材料损耗与成本，实现高材料利用率的一滴成型，有利于拓展打印方法的应用场景。本数据集以不同性质界面的单液滴成型过程为监测对象，主要包含单液滴成型监测装置示意图与实物图、单液滴成型基底制备示意图、单液滴成型基底

国家基础学科公共科学数据中心290

连续纤维增强复合材料3D打印工艺规范

3D打印

复合材料

本项目“连续纤维增强复合材料3D打印工艺规范”对应项目“连续纤维增强复合材料3D打印工艺规范”项目指标3.6：工艺规范一套，基于研发的多自由度连续纤维增强复合材料3D打印系统用于假肢接受腔制造的模型处理和设备制定的操作规程。数据量2.5MB。

国家基础学科公共科学数据中心100

Nautilus Sub by Five Ton Crane

3D打印

模型展示

This is a quick photo scan I did of Five Ton Crane's amazing Nautilus Sub which was exhibited at Makerfaire. I had only a few minutes early in the morning to capture it before it was mobbed by adoring

Mendeley Data2024-05-10 更新90

Monitoring of particulate matter emissions from 3D printing activity in the home setting.xlsx

3D打印

环境监测

The dataset is obtained by Monitoring of particulate matter emissions from 3D printing activity in the home setting, by assessing verity of printing attributes and settings.

DataCite Commons2021-03-26 更新130

Underlying Data: A Quantitative Analysis of 3D Printed Face Shields and Masks During COVID-19

3D打印

COVID-19防护措施

This is the underlying data supporting a study titled "A Quantitative Analysis of 3D Printed Face Shields and Masks During COVID-19" (https://doi.org/10.35241/emeraldopenres.13815.1). 37 face shields

Mendeley Data2024-01-31 更新100

gcode files halfshed_3DCP and Fullshed_PLA

资源简介：

相关数据集