电动单梁起重机定期检验收费计算数据

电动单梁起重机定期检验收费计算是根据起重机的具体情况，包括起重机的额定起重量、跨度、起升高度等因素，来确定检验费用的金额。它能够为起重机使用单位提供合理的收费依据，为检验机构提供方便准确的收费标准。1、数据采集：收集电动单梁起重机的额定起重量、跨度、起升高度等参数。2、数据处理：首先根据额定起重量Gn＜5、5≤Gn＜10、10≤Gn＜16、16≤Gn＜25、25≤Gn＜40五个区间，确定收费标准分别为400、450、560、630、700。根据跨度(m)L≤10.5,LX=0;L＞10.5,LX=((L-10.5)/5)*0.1确定跨度系数LX。根据起升高度G≤6,GX=0;G>6,GX=((G-6)/3)*0.05确定起升高度系数GX。3、套用算法公式计算：电动单梁起重机定期检验实收金额=收费标准*（1+跨度系数+起升高度系数+其他情况系数）*检验种类。4、补充说明：①跨度系数LX中的((L-10.5)/5)部分和起升高度系数GX中的((G-6)/3)部分需向上取整，如计算结果为1.2，需取整为2。②其他情况系数依次为含双小车，0.1；含双司机室，0.1；含抓斗，0.1；含起重吸盘，0.1；含起集装箱吊具，0.1；冶金起重机，0.3；有副钩起重机，0.3。其他情况可同时包含多个，系数相加即可。③定期检验的检验种类值为1。

The periodic inspection fee calculation for electric single-girder cranes is determined based on specific crane parameters including rated lifting capacity, span, lifting height and other relevant factors. This calculation can provide a reasonable charging basis for crane users and a convenient and accurate charging standard for inspection institutions.
1. Data Collection: Collect parameters of electric single-girder cranes such as rated lifting capacity, span, lifting height and other related indicators.
2. Data Processing:
First, determine the charging standards corresponding to five rated lifting capacity (Gn) intervals: 400 for Gn < 5, 450 for 5 ≤ Gn < 10, 560 for 10 ≤ Gn < 16, 630 for 16 ≤ Gn < 25, and 700 for 25 ≤ Gn < 40.
Then calculate the span coefficient LX following the rules: LX = 0 when the span (in meters) L ≤ 10.5; when L > 10.5, LX = ((L - 10.5)/5) * 0.1.
Calculate the lifting height coefficient GX as follows: GX = 0 when the lifting height G ≤ 6; when G > 6, GX = ((G - 6)/3) * 0.05.
3. Algorithm Application for Fee Calculation: The actual periodic inspection fee for electric single-girder cranes = Charging standard * (1 + span coefficient LX + lifting height coefficient GX + other situation coefficients) * inspection type value.
4. Supplementary Notes:
① The part ((L - 10.5)/5) in the span coefficient LX and the part ((G - 6)/3) in the lifting height coefficient GX shall be rounded up. For example, if the calculated result is 1.2, it shall be rounded up to 2.
② The other situation coefficients are as follows: double trolley, 0.1; double driver's cab, 0.1; grab bucket, 0.1; lifting suction cup, 0.1; container spreader, 0.1; metallurgical crane, 0.3; crane with auxiliary hook, 0.3. Multiple applicable situations can be included simultaneously, and the coefficients shall be summed.
③ The inspection type value for periodic inspection is 1.

搜集汇总

数据集介绍

特点

该数据集提供了电动单梁起重机定期检验收费计算的详细数据，包括设备参数和收费标准，用于为起重机使用单位和检验机构提供收费依据。数据集每日更新，包含31621条记录，适用于居民服务、修理和其他服务业。